Jura ENA-F7-F8-J-Z-GIGA Brew Group Repair Kit

This kit provides all of the necessary O-Rings to fully refurbish the Brew Group. The red Piston Gaskets pictured at the top are for the upper and lower pistons. The black O-Ring is for the Riser Tube. The 2 blue O-Rings are High Temperature EPDM O-Rings for PTFE Pressure Hoses (Only 1 may be needed depending on model). The 2 red Nut Seals are located inside the Drain Valve. The first black O-Ring pictured at the bottom is for the Fluid Nipple. The next 2 black O-Rings are for the 2-Way Connector (The same piece the red nut seals are located). The last black O-Ring is for the Extension Arm that connects to the Fluid Connector.

• Error 8